This episode is part three of a three-part series: “Re-Roofing With Daniel” in which he addresses some of the most common questions encountered when it comes to replacing your roof.

RoofLifeB016-133 Podcast Transcription: 

Shayla: Thank you for joining us today for the Roof Life of Oregon podcast. I’m talking today with Daniel who is a roof specialist at Roof Life. And, Daniel, today we’re going into Part 3 of our three part series of re-roofing. And I want to talk about plywood prep. What is that and why is it important when you’re re-roofing?

Daniel: It’s extremely important and, again, it’s one of those things roofers just don’t talk to homeowners about. So let’s walk you through a little bit of the tear-off process and getting ready to put your new roof on. Depending on how many layers and what you have going on, most roofs have a plywood deck. It’s the majority of them. It’s the plywood that everything goes on top of. So the roofing contractor comes in and they tear off all the old shingles, get off all the old paper and the most common thing done is after they get that and they’re down to bare wood, they take the nails, they hammer them in, then they run their new paper over the top of it and put new shingles over the top of that. We come back later and all of sudden, you’ll see in five, seven, ten years, all of a sudden you’ll see plywood that’s popped up. You’ll see these imperfections, things that just aren’t right and it’s not because the roof was put on, it’s because they didn’t get the plywood ready.

When you’re tearing off roofs and you’re doing things, you’re moving the structure around and you want to make sure that it’s ready to go. So along with putting the roof on, you wan to secure it. So when a roof is put on, there needs to be a gap between the plywood that allows the plywood to expand and contract and move around. Older houses, over time, can close that gap. Sometimes they were too tight to begin with. So once we tear off the roof, rather than just throw our paper over the top and start roofing again, we get it ready; remove nails, pound in ones that can’t be roofed, make sure it’s nice and smooth. Then check all the gaps to all the plywood. Make sure there’s a gap. If there’s not a gap, we can run a nice line, run our saw down those lines, down between the plywood sheets and get a gap in there. We want it to be able to expand and contract.
Next step: securing the plywood. Sometimes, just over the years, that plywood has moved around and it’s lifted up, popped up here, curled here. We can re-secure it in most cases, go back on with a nail and re-secure it back down. We can upgrade it to screws, make sure that it’s not going to pop up at all. Re-secure all the plywood, get it nice and clean, now you can go back on with your paper, get it all secured and put your roofing on. That way you’re going to get the peace of mind, the roof is going to last, you’re not going to start seeing imperfections and plywood pops, again, five, seven, ten years later. It’s the right to do before you put the roof on. So prep is the most important part of putting on a roof, getting it ready correctly.

Shayla: These are some of the things that Roof Life of Oregon does to go above and beyond to make sure your roof is going to last the full length of its lifetime. If you have any more questions about parts 1, 2, or 3 of re-roofing with Daniel, please reach out to the team at Roof Life of Oregon.

Rooflife Warranties

Our Workmanship Warranty is the key to keeping your shingle company’s warranty in place.

Lifetime Workmanship Warranty

Can we keep moss and mold from growing back? Yes. Yes we can.

No Moss Growth Warranty

We fix leaks for good.

No Leak Warranty

Meet Our CEO